Resynchronizing a Remote Unit

1. Open the Data Resynchronization application.
2. In the Available Remote Units list, select the Remote Unit you want to resynchronize.
   To find a particular Remote Unit or group of related Remote Units, you can setup and execute a search with the
         Search Engine utility.
   The Inputs for the selected Remote Unit are displayed in the Selected Remote Unit Inputs list
3. In the Selected Remote Unit Inputs list, select the inputs you want to resynchronize.
4. In the Start Date and End Date boxes, specify the period over which to view the Time of Call readings for the selected inputs.
5. Click the Run button -
   The Time of Call Adjustment for dialog box appears.
6. Click the Time of Call tab and examine the displayed list of readings. After you have determined the period over which to resynchronize and the starting point, do the following:
   Under Adjust Direction, specify the direction, from the starting point reading, to resynchronize the readings.
       The Adjust FORWARD from: label is displayed as Adjust BACKWARD from: if you select adjust "Backward."
   In the Time of Call Readings list, select the reading to use as the starting point for the resynchronization process, and click the Set
      button located next to the Adjust FORWARD or BACKWARD from: box. The selected reading is now displayed in the box.
   In the Time of Call Readings list, select the reading to use as the ending point for the resynchronization process, and click the Set
      button located next to the Adjust through box. The selected reading is now displayed in the box.
7. In the Time of Call Readings list, double-click the reading you selected as the starting point. (Be sure to double-click the "Input Reading" column).
   The Reading Change dialog box appears.
8. In the New Reading box, enter the new Time of Call reading.
   The Time of Call Adjustment dialog box appears.
   The adjusted reading is displayed in the list with a "R" in the associated "Status" column.
9. If you want to adjust the Intervals:
   Click the Interval tab and select Adjust Intervals.
10. Click OK.
    The Time of Call readings are resynchronized
    The Intervals are adjusted (if you chose to adjust), and
    The database is updated accordingly.