Adding an AE Remote Unit

There are two ways to add an AE Remote Unit to the system:
To add a new Remote Unit to the system:
  1. Open the AE Corrector Configuration application.
  2. Do one of the following:
    Click the Add Icon.
    Select Add from the Data menu.
    The Add Corrector Unit dialog box appears.
  3. In the New Remote Unit ID: box, enter the new Remote Unit ID.
    If the new Remote Unit ID is for a Mercury Instruments Remote Unit product, and the first integers in the ID are zeros, you can type
          the non-zero integers in the New Remote Unit ID box and the zeros are automatically inserted. For example, if the new Remote
          Unit ID is 000018, you can type 18. This feature works for IDs that are as large as six places (as shown in the example).
  4. In the Hardware Type box, click the arrow and select a hardware type.
  5. In the Corrector Type box, click the arrow and select a corrector type.
  6. In the Call Profile box, click the arrow and select a call profile.
  7. Click OK.
To add a new AE Remote Unit, using information copied from an existing Remote Unit, to the system:
  1. Open the AE Corrector Configuration application.
  2. In the Available AE Corrector Units list, select the Remote Unit you want to copy information from.
  3. Do one of the following:
    Click the Add Icon.
    Select Add from the Data menu.
    The Add Corrector Unit dialog box appears.
  4. In the New Remote Unit ID: box, enter the new Remote Unit ID.
    If the new Remote Unit ID is for a Mercury Instruments Remote Unit product, and the first integers in the ID are zeros, you can type
          the non-zero integers in the New Remote Unit ID box and the zeros are automatically inserted. For example, if the new Remote
          Unit ID is 000018, you can type 18. This feature works for IDs that are as large as six places (as shown in the example).
  5. Select Copy Remote Unit ID:.
    The remaining fields are filled with the information from the selected Remote Unit.
  6. Click OK.

Back